Vintage Dirt Bike Q & A

Anything and everything about Vintage Dirt Bikes! After you Register, email nathan@alp-sys.com and let me know so I can activate you.
It is currently Wed Jun 18, 2025 11:49 am

All times are UTC - 7 hours [ DST ]




Post new topic Reply to topic  [ 7 posts ] 
Author Message
PostPosted: Thu Mar 26, 2015 5:11 am 
Offline

Joined: Thu Jun 19, 2014 3:17 am
Posts: 8
Location: Cadott, WI
All winker lights illuminating but no "wink". Where is the relay located and what should I purchase? There's a zillion of them on Ebay, but which one? Is there a way to test so I'm not throwing around money when not needed? My battery IS somewhat questionable, but with bike running, it appears as though charging system/battery is working properly. All lights barely, if any, increase in intensity as RPM's increase. Multitester indicates 7+ volts when engine is running as well.

Any suggestions?

Thanks!


Top
 Profile  
 
PostPosted: Thu Mar 26, 2015 9:09 am 
Offline

Joined: Mon Mar 23, 2015 4:40 pm
Posts: 15
This one I have an answer for...i had same issue...as much as I like keeping things to OEM new circuit board technology makes them work like they should- they only thing missing is the cute clicking- it's oddly silent- but I guess only to our generation.

I've got 2 from these guys, works on the CB125 too

http://tinyurl.com/oshosfe

If the link doesn't work just search for it on Ebay.

_________________
'75 MT250
'78 Sportster
'81 RD350LC
'86 FZ600C
'94 CBR400RR (track bike)


Top
 Profile  
 
PostPosted: Thu Mar 26, 2015 9:12 am 
Offline

Joined: Mon Mar 23, 2015 4:40 pm
Posts: 15
and the relay is under the right front of the tank hanging in it's rubber mount. on the '75 for some reason there are three wires, the green one is not used you just hook up the black and grey. The new EMGO unit has a B next to the tab you stick the black one on.

_________________
'75 MT250
'78 Sportster
'81 RD350LC
'86 FZ600C
'94 CBR400RR (track bike)


Top
 Profile  
 
PostPosted: Thu Mar 26, 2015 12:04 pm 
Offline

Joined: Thu Jun 19, 2014 3:17 am
Posts: 8
Location: Cadott, WI
hudtm60 wrote:
This one I have an answer for...i had same issue...as much as I like keeping things to OEM new circuit board technology makes them work like they should- they only thing missing is the cute clicking- it's oddly silent- but I guess only to our generation.

I've got 2 from these guys, works on the CB125 too

http://tinyurl.com/oshosfe

If the link doesn't work just search for it on Ebay.


I wish they made the cute clicking a little louder. Funny how these blinkers cute clicks get less and less as we get older and older!! :lol:

Does the round Emgo winker mount good and solid in the OEM's place?

Also...I might be mistaken, but, does the extra wire perhaps hook to an indicator lamp on a gauge in certain applications?

One other thing....How many watts do the turn signals draw on each side when flashing? I believe I answered my own question. The correct bulbs should be GE 1129's. They are 6V, 17W, single pole units. However, if you have running lights on the front in addition to the winkers, that is a whole different animal. They are dual pole bulbs! Not sure of the bulb model number here.


Last edited by Doug B. on Thu Mar 26, 2015 1:22 pm, edited 2 times in total.

Top
 Profile  
 
PostPosted: Thu Mar 26, 2015 1:07 pm 
Offline

Joined: Mon Mar 23, 2015 4:40 pm
Posts: 15
Attachment:
SilverFlasherUnitundertankcloser.JPG
SilverFlasherUnitundertankcloser.JPG [ 2.03 MiB | Viewed 8423 times ]
Attachment:
SilverFlasherUnitundertank.JPG
SilverFlasherUnitundertank.JPG [ 3.71 MiB | Viewed 8423 times ]

_________________
'75 MT250
'78 Sportster
'81 RD350LC
'86 FZ600C
'94 CBR400RR (track bike)


Top
 Profile  
 
PostPosted: Thu Mar 26, 2015 1:27 pm 
Offline

Joined: Thu Jun 19, 2014 3:17 am
Posts: 8
Location: Cadott, WI
hud,

Looks really good!
Two more questions....
1.) Do you have running lights up front?
2.) What model numbers are your bulbs front and rear?

Sure appreciate the assistance. I'll get mine working yet!

Doug


Top
 Profile  
 
PostPosted: Fri Mar 27, 2015 1:25 am 
Offline

Joined: Mon Mar 23, 2015 4:40 pm
Posts: 15
Doug,

my MT doesn't have running lights. my system can barely run the headlight even with a new (and Battery Tender'd) battery.

The bulbs are single pole Stanley 1129's 6v 17w.

here's vid of them operating. https://youtu.be/drVxRxQrqzo

The flasher unit has been my only real success- just finding out how tough throttle cables are to find. Put it this way if you can't find something on the internet with 5mins- it's just not there. Well there is one....in Australia for $116.

Good luck with your MT!

Hud

_________________
'75 MT250
'78 Sportster
'81 RD350LC
'86 FZ600C
'94 CBR400RR (track bike)


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 7 posts ] 

All times are UTC - 7 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 21 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group