Vintage Dirt Bike Q & A

Anything and everything about Vintage Dirt Bikes! After you Register, email nathan@alp-sys.com and let me know so I can activate you.
It is currently Thu Jul 03, 2025 9:14 am

View unanswered posts | View active topics


Board index » Questions & Answers » Honda CR, MR & MT

All times are UTC - 7 hours [ DST ]



Post new topic Reply to topic  Page 1 of 1
  [ 5 posts ] 
  Print view Previous topic | Next topic 
Author Message
hump@evovintage
 Post subject: Lower Roller on 78 CR250
PostPosted: Mon Dec 20, 2004 4:36 pm 
Offline

Joined: Mon Dec 20, 2004 10:56 am
Posts: 1
Location: Houston, TX
What's the solution for the lower chain roller behind the footpeg? I got a Red-Racer roller and the recess wasn't deep enough and I had to grind the head off the bolt to get it to clear the brake arm and then it blew apart in 2 motos. What else works out there?
Top
 Profile  
 
redrocket190
 Post subject:
PostPosted: Mon Dec 20, 2004 6:09 pm 
Offline

Joined: Fri Feb 27, 2004 10:20 pm
Posts: 906
Location: San Clemente, CA
The Red Racer and OEM rollers use a recessed allen bolt that when installed is flush with the outside edge of the roller. Is this what you used? If not, I'll get you the part # for the correct one. BTW, if you are using an after-market swing arm, it will pinch the chain against the stock-sized roller. That issue is handled in a thread over on the Red Racer forum.

_________________
Michael Stiles
1979 Honda CR250R Elsinore | 2006 Husqvarna SM510R | 2007 Service Honda CR500R-AF
Top
 Profile  
 
Guest
 Post subject:
PostPosted: Mon Dec 20, 2004 9:12 pm 
Couldn't source the flat allen head bolt, so had to go with the next best thing. Would be interested in bolts, tell me how to get them. I'm using a stock swingarm. I'm familiar with the fox arms and the cool extension they offered. Thanks for the info.
Top
  
 
redrocket190
 Post subject:
PostPosted: Tue Dec 21, 2004 2:49 pm 
Offline

Joined: Fri Feb 27, 2004 10:20 pm
Posts: 906
Location: San Clemente, CA
Go to http://www.cmsnl.com and search for part # 90124-430-700. Costs Euro 7.50. You could try http://www.westernhillshonda.com and/or http://www.powersportspro.com but I think it is a discontinued part.

_________________
Michael Stiles
1979 Honda CR250R Elsinore | 2006 Husqvarna SM510R | 2007 Service Honda CR500R-AF
Top
 Profile  
 
hooskie17
 Post subject: 79 Lower Chain Roller
PostPosted: Thu Dec 23, 2004 6:31 pm 
Thanks for the info. I ordered from Classic Motorcycle.
Top
  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 5 posts ] 

Board index » Questions & Answers » Honda CR, MR & MT

All times are UTC - 7 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 34 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group